Key operation in Search mode, Special keys | Uniden UBCD396XT

UBCD396XT

Key operation in Search mode

Special keys

∙Turn the SELECT-VOLUME-SCROLLknob to change the direction of the search.

∙While monitoring a channel, turn the SELECT-VOLUME-SCROLLknob to resume searching.

∙In Custom Search mode, FUNCTION + turn the SELECT-VOLUME SCROLL knob to select a custom search range. The scanner starts at the custom search range you select here.

∙FUNCTION+ tap MENU to go to the Search for... menu.

∙During a Quick Search, FUNCTION+ tap MENU to go to the Srch/CloCall Opt menu.

Keypad controls

Key Name

(2nd

operation)

HOLD (Close

Action On

1 (Search 1)

2 (Search 2)

3 (Search 3)

Call)

Tap

Enter Hold

Disable the custom search range assigned to this

mode.

key. Tap again to enable.

FUNCTION

Toggle Close

Start the search range assigned to this Search Key.

Call modes.

+ Tap

FUNCTION

Enter Close

Call Only

NA

NA

NA

+ Press & hold

mode.

Key Name

(2nd operation)

Action on:

Scan (Search)

4 (IF

5 (Volume

6 (Display

exchange)

offset)

mode)

Tap

Switch to Scan

Disable the custom search range assigned to this

mode.

key. Tap again to enable.

When

FUNCTION

monitoring a

Resume

frequency,

NA

Switch the

+ Tap

searching.

toggle the IF

display mode.

for that

frequency.

131

Image 145

Uniden UBCD396XT owner manual Key operation in Search mode, Special keys

Contents

UBCD396XT Page Table of Contents UBCD396XT UBCD396XT Using Quick KEYS, Startup KEYS, and Search Keys 105 UBCD396XT Vii Viii 149 163 167 Xii Power Disconnection Caution General PrecautionsEarphone Warning Liquid Exposure Warning Whats included inside the box? Setting up the hardware Connect the antenna Install the batteries To remove the belt clip Attach the belt clip Configuring your scanner Connecting a GPS receiverConnecting the receiver Compatible GPS receivers Troubleshooting Preloaded Systems Using Preloaded Systems Search mode Scan modeHold mode Close Call Priority mode Close Call Do Not Disturb mode Close Call Only modePriority Scan mode Function + tap no GPS mode Priority Plus Scan modeTone Out mode Band Scope mode Key Overview Keys and their functions Operating the controls Using the Function buttonKey functions in different operation modes Locking the Keypad Menu tree Using the menuMain menu Handheld models only Reading the display As a voice channel, but the scanner is System number line Sx WFM Special displays Programming a Conventional System Conventional SystemsCreate a system System properties Channel group properties Create at least 1 channel groupCreate at least 1 channel in each group NAC UBCD396XT UBCD396XT Programming an Edacs Scat System Edacs Scat SystemsOperations Site properties Create a siteCreate at least 1 frequency Frequency properties UBCD396XT Programming an Edacs System Edacs Trunked SystemsNumber tag Create at least 1 site Create at least 1 frequency in each site Programming a system for Scanning Channel properties UBCD396XT UBCD396XT UBCD396XT Programming an LTR System LTR Trunked Systems Create at least 1 site Set Lockout Create a channel in each group Create a channel group Channel properties UBCD396XT Programming a Motorola System Motorola Trunked SystemsSystems only Status bit ID formatAttenuator Hold time Create a channel Available Tgid Edit Tgid UBCD396XT UBCD396XT UBCD396XT Motorola fleet maps Preset Fleet MapsCustom Fleet Maps Number Blocks How Fleet Maps WorkEnding Size Size Codes Programming a P25 System Standard P25 Trunked Systems Edit Band Plan Programming a system for Scanning Create a channel in a group Edit Name UBCD396XT Programming a Single-Frequency P25 System Single-Frequency P25 Trunked Systems Create exactly 1 site Create a channel group Tgid Edit Tgid Conventional radio systems Radio Systems OverviewTrunked radio systems System Controller Trunked system basicsVoice Frequency Pool Talk Group IDs Real life example Before you program a trunked system Deciphering Trunked Systems Conventional Systems Edacs SystemsNon-scannable Systems System Voice Talk Group IDs Channels System Frequencies Location-based Scanning Geopolitical Approach UBCD396XT UBCD396XT Antenna-Centric Approach Combining for Efficiency See Also Programming Number Tags Number TagsAssigning an SNT Assigning a Chnt To a custom search range Using Number Tags Programming Quick Keys Quick KeysAssigning an SQK To a conventional system Assigning a GQK Using Quick Keys To use SQK 10 through To use SQK 0 throughTo use a GQK Search Keys Using Search KeysProgramming Search Keys Programming a location for a site Programming locationsProgramming a location for a channel group Programming general locations To create a new location ∙ roads Dangerous Road Edit an existing location For Dangerous Xing and Dangerous Roads only To sound an alert when Follow these steps Setting alerts Choose the Alert Tone and Alert Light you Quick Keys Using Quick Keys, Startup Keys, and Search KeysStartup Keys Search Keys Configuring Tone Out channels Tone Out modeUsing Tone-Out Mode Key operation in Tone Out Mode GPS Key operation in Close Call Only mode Close Call mode Quick Search Intermediate Screen enter Frequency To turn on Band Scope mode Band Scope mode Key operation in Band Scope mode Change Switch LCD See Also GPS modeYou must have a compatible GPS receiver connected Main GPS display Location alert display Reading the display in GPS mode Location review display Exchange Offset Mode Key operation in GPS mode2nd Action on Attenuation Freq Modulation LCD Priority Edit Name Program SystemEdit Sys Option Edit Site Copy System Edit GroupDelete System New System Global system options Edit Sys OptionConventional system options Set Lockout Set Startup KeySet Hold Time P25 Waiting Time ID Scan/Search Trunked system optionsPriority ID Scan Emergency Alert P25 System options Motorola system options P25 NAC Option Options available for all groups Edit GroupEdit Name Edit Channel New Group Delete Group Set LocationInfo Set GPS EnableSet Latitude and Set Longitude Set Range 115 Edit Frequency conventional systems Edit ChannelSet Audio Type Set Attenuator Set ModulationSet Priority Set Alert Analog channel options Set Lockout Digital channel options Options available for all sites Edit Site Auto Set Frequencies Options available for P25 systems Options available for Motorola systemsDelete Site New Site Options available for Edacs systems Volume Offset Edacs Scat OnlySet Site Type LTR and Edacs system options Set FrequenciesEdit Frequency Delete Frequency LCN Logical Channel Number Edacs Scat system options Default Scan Mode Scan modeScanning vs. Searching Scanning trunked systems Locked Items Key operation in Scan modeSpecial keys Keypad controls Scan Search Volume Display Exchange Reverse Modulation Backlight No Decimal Yes Enter Key operation in Search mode Reverse Attenuation Freq Modulation Message Assigned to this Frequency Cancel Key operation in Hold mode Hold mode Frequency into Conventional system display Reading the displays in Hold mode Trunked system display Service search with scan hold display Motorola Type I Systems Edit Talk Group IDMotorola Type II Systems P25 Single Frequency Systems or Standard System Trunk Site LTR systems Call channel Motorola, P25 or Edacs Creating a custom band plan Edit Band Plan For sites with a single band plan Calculating upper base frequenciesFor sites with multiple band plans Custom Frequency Table 156.240 MHz 162.045 MHz Close Call Only Close CallCC Auto Store Hits with Scan Set CC Override Set CC ModeSet CC Alert Set Alert Tone Set Alert Light Set CC Pause Set CC BandsBand Frequencies 800 MHz Priority Scan menu Priority ScanSet Interval MaxCHs/Pri-Scan Set Type Program LocationSet Alert Tone Set Range Set Location Info Delete Location Set Alert VolumeNew Location Set Speed Limit Set Heading Create a new location Search and Store Edit Service Service SearchSearch for Edit Custom Custom SearchSearch with Scan Edit Srch Limit Set C-Ch Only Set Step Set MOT Band Plan Search and Store Set Search Key Search with Scan Alert Set Alert Tone Freq Lockouts Srch/CloCall OptBroadcast Screen Tone/Code Search Set Delay TimeRepeater Find Max Auto Store Set Audio AGC Set AttenuatorP25 Waiting Time Assigning Startup Keys Startup Keys Assigned Startup State Key Using Startup Keys Locked None Unlocked Unlocked no change Locked no change Tone B Setting Tone a and Tone B Settings 171 Tone-Out for Tone-Out SetupTone-Out Standby Set Alert Tone Set Alert Light Set Audio AGC Tone-Out Search To turn Key Safe mode on or off Key Safe Mode Modes, this key is Disabled. Search mode, this Normal operation Disabled Adjust Key Beep SettingsBattery Option Set Backlight Adjust Contrast Adjust Audio AGCSet Charge Time Set GPS Format Set C-CH OutputSet Serial Port P25 LP Filter Band DefaultsDisplay Unit ID Memory Used See Scanner InfoFirmware Version Wired Clone General UBCD396XT SpecificationsSensitivity nominal 12dB Sinad Close Call Sensitivity Signal Noise Ratio nominalNominal Special Functions Frequency RangeSupported trunking systems Band Scope Function Heterodyne System Dynamic memory allocation capacityCtcss and DCS Tones Ctcss Tone Frequencies 50 frequencies total Hz 187 Warranty Procedure for obtaining warranty service