Manuals / Uniden / Photography / Photo Scanner

Uniden UBCD396XT owner manual Set Alert Tone

Models: UBCD396XT

1 203

Download 203 pages 43.97 Kb

Page 177

UBCD396XT

48.Set Alert Tone

Choose one of the 9 different tone patterns for the scanner to use for the alert tone:

	Alert 1			4000 Hz for 50 ms » Silence for 20 ms » 4000 Hz for 50 ms » Silence
	Alert 1			for 20 ms » 4000 Hz for 50 ms
				for 20 ms » 4000 Hz for 50 ms

	Alert 2			800 Hz for 50 ms » Silence for 20 ms » 1050 Hz for 50 ms » Silence
	Alert 2			for 20 ms » (repeat twice)
				for 20 ms » (repeat twice)

	Alert 3			800 Hz for 50 ms » Silence for 20 ms » 1050 Hz for 50 ms » Silence
	Alert 3			for 20 ms » 4000 Hz for 100 ms
				for 20 ms » 4000 Hz for 100 ms

	Alert 4			120 Hz for 10 ms » 800 Hz for 10 ms » 1200 Hz for 10 ms (repeat 5
	Alert 4			times)
				times)

	Alert 5			1200 Hz for 150 ms

	Alert 6			1200 Hz for 70 ms » Silence for 50 ms » 1200 Hz for 70 ms

	Alert 7			2000 Hz for 200 ms » Silence for 10 ms » 800 Hz for 150 ms (repeat
	Alert 7			3 times)
				3 times)

	Alert 8			500 Hz for 40 ms » Silence for 10 ms » 500 Hz for 40 ms » Silence
	Alert 8			for 10 ms » 500 Hz for 40 ms
				for 10 ms » 500 Hz for 40 ms

	Alert 9			2400 Hz for 70 ms » Silence for 20 ms » 3000 Hz for 70 ms » Silence
	Alert 9			for 70ms (repeat twice)
				for 70ms (repeat twice)

	Off			No alert tone sounded.

If you select an alert tone, the scanner prompts you to select the volume level

(Level 1 through Level 15 ) you want to the alert tone to use; leave the volume at Auto to have the scanner sound the alert tone without changing the volume.

163

Image 177

Uniden UBCD396XT owner manual Set Alert Tone

Contents

UBCD396XT Page Table of Contents UBCD396XT UBCD396XT Using Quick KEYS, Startup KEYS, and Search Keys 105 UBCD396XT Vii Viii 149 163 167 Xii Power Disconnection Caution General PrecautionsEarphone Warning Liquid Exposure Warning Whats included inside the box? Setting up the hardware Connect the antenna Install the batteries To remove the belt clip Attach the belt clip Configuring your scanner Connecting a GPS receiverConnecting the receiver Compatible GPS receivers Troubleshooting Preloaded Systems Using Preloaded Systems Search mode Scan modeHold mode Close Call Priority mode Close Call Do Not Disturb mode Close Call Only modePriority Scan mode Function + tap no GPS mode Priority Plus Scan modeTone Out mode Band Scope mode Key Overview Keys and their functions Using the Function button Operating the controlsKey functions in different operation modes Locking the Keypad Using the menu Menu treeMain menu Handheld models only Reading the display As a voice channel, but the scanner is System number line Sx WFM Special displays Programming a Conventional System Conventional SystemsCreate a system System properties Create at least 1 channel group Channel group propertiesCreate at least 1 channel in each group NAC UBCD396XT UBCD396XT Edacs Scat Systems Programming an Edacs Scat SystemOperations Create a site Site propertiesCreate at least 1 frequency Frequency properties UBCD396XT Edacs Trunked Systems Programming an Edacs SystemNumber tag Create at least 1 site Create at least 1 frequency in each site Programming a system for Scanning Channel properties UBCD396XT UBCD396XT UBCD396XT Programming an LTR System LTR Trunked Systems Create at least 1 site Set Lockout Create a channel in each group Create a channel group Channel properties UBCD396XT Motorola Trunked Systems Programming a Motorola SystemSystems only ID format Status bitAttenuator Hold time Create a channel Available Tgid Edit Tgid UBCD396XT UBCD396XT UBCD396XT Motorola fleet maps Preset Fleet MapsCustom Fleet Maps Number How Fleet Maps Work BlocksEnding Size Size Codes Programming a P25 System Standard P25 Trunked Systems Edit Band Plan Programming a system for Scanning Create a channel in a group Edit Name UBCD396XT Programming a Single-Frequency P25 System Single-Frequency P25 Trunked Systems Create exactly 1 site Create a channel group Tgid Edit Tgid Radio Systems Overview Conventional radio systemsTrunked radio systems System Controller Trunked system basicsVoice Frequency Pool Talk Group IDs Real life example Before you program a trunked system Deciphering Trunked Systems Conventional Systems Edacs SystemsNon-scannable Systems System Voice Talk Group IDs Channels System Frequencies Location-based Scanning Geopolitical Approach UBCD396XT UBCD396XT Antenna-Centric Approach Combining for Efficiency See Also Number Tags Programming Number TagsAssigning an SNT Assigning a Chnt To a custom search range Using Number Tags Programming Quick Keys Quick KeysAssigning an SQK To a conventional system Assigning a GQK Using Quick Keys To use SQK 0 through To use SQK 10 throughTo use a GQK Using Search Keys Search KeysProgramming Search Keys Programming a location for a site Programming locationsProgramming a location for a channel group Programming general locations To create a new location ∙ roads Dangerous Road Edit an existing location For Dangerous Xing and Dangerous Roads only To sound an alert when Follow these steps Setting alerts Choose the Alert Tone and Alert Light you Quick Keys Using Quick Keys, Startup Keys, and Search KeysStartup Keys Search Keys Tone Out mode Configuring Tone Out channelsUsing Tone-Out Mode Key operation in Tone Out Mode GPS Key operation in Close Call Only mode Close Call mode Quick Search Intermediate Screen enter Frequency To turn on Band Scope mode Band Scope mode Key operation in Band Scope mode Change Switch LCD GPS mode See AlsoYou must have a compatible GPS receiver connected Main GPS display Location alert display Reading the display in GPS mode Location review display Exchange Offset Mode Key operation in GPS mode2nd Action on Attenuation Freq Modulation LCD Priority Edit Name Program SystemEdit Sys Option Edit Site Copy System Edit GroupDelete System New System Edit Sys Option Global system optionsConventional system options Set Lockout Set Startup KeySet Hold Time P25 Waiting Time ID Scan/Search Trunked system optionsPriority ID Scan Emergency Alert P25 System options Motorola system options P25 NAC Option Options available for all groups Edit GroupEdit Name Edit Channel New Group Delete Group Set LocationInfo Set GPS EnableSet Latitude and Set Longitude Set Range 115 Edit Channel Edit Frequency conventional systemsSet Audio Type Set Attenuator Set ModulationSet Priority Set Alert Analog channel options Set Lockout Digital channel options Options available for all sites Edit Site Auto Set Frequencies Options available for P25 systems Options available for Motorola systemsDelete Site New Site Volume Offset Edacs Scat Only Options available for Edacs systemsSet Site Type LTR and Edacs system options Set FrequenciesEdit Frequency Delete Frequency LCN Logical Channel Number Edacs Scat system options Default Scan Mode Scan modeScanning vs. Searching Scanning trunked systems Key operation in Scan mode Locked ItemsSpecial keys Keypad controls Scan Search Volume Display Exchange Reverse Modulation Backlight No Decimal Yes Enter Key operation in Search mode Reverse Attenuation Freq Modulation Message Assigned to this Frequency Cancel Key operation in Hold mode Hold mode Frequency into Conventional system display Reading the displays in Hold mode Trunked system display Service search with scan hold display Motorola Type I Systems Edit Talk Group IDMotorola Type II Systems P25 Single Frequency Systems or Standard System Trunk Site LTR systems Call channel Motorola, P25 or Edacs Creating a custom band plan Edit Band Plan For sites with a single band plan Calculating upper base frequenciesFor sites with multiple band plans Custom Frequency Table 156.240 MHz 162.045 MHz Close Call Only Close CallCC Auto Store Hits with Scan Set CC Mode Set CC OverrideSet CC Alert Set CC Bands Set Alert Tone Set Alert Light Set CC PauseBand Frequencies 800 MHz Priority Scan Priority Scan menuSet Interval MaxCHs/Pri-Scan Program Location Set TypeSet Alert Tone Set Range Set Location Info Set Alert Volume Delete LocationNew Location Set Speed Limit Set Heading Create a new location Search and Store Service Search Edit ServiceSearch for Edit Custom Custom SearchSearch with Scan Edit Srch Limit Set C-Ch Only Set Step Set MOT Band Plan Search and Store Set Search Key Search with Scan Alert Set Alert Tone Srch/CloCall Opt Freq LockoutsBroadcast Screen Tone/Code Search Set Delay TimeRepeater Find Max Auto Store Set Attenuator Set Audio AGCP25 Waiting Time Assigning Startup Keys Startup Keys Assigned Startup State Key Using Startup Keys Locked None Unlocked Unlocked no change Locked no change Tone B Setting Tone a and Tone B Settings 171 Tone-Out Setup Tone-Out forTone-Out Standby Set Alert Tone Set Alert Light Set Audio AGC Tone-Out Search To turn Key Safe mode on or off Key Safe Mode Modes, this key is Disabled. Search mode, this Normal operation Disabled Adjust Key Beep SettingsBattery Option Set Backlight Adjust Audio AGC Adjust ContrastSet Charge Time Set C-CH Output Set GPS FormatSet Serial Port Band Defaults P25 LP FilterDisplay Unit ID See Scanner Info Memory UsedFirmware Version Wired Clone UBCD396XT Specifications GeneralSensitivity nominal 12dB Sinad Signal Noise Ratio nominal Close Call SensitivityNominal Special Functions Frequency RangeSupported trunking systems Band Scope Function Heterodyne System Dynamic memory allocation capacityCtcss and DCS Tones Ctcss Tone Frequencies 50 frequencies total Hz 187 Warranty Procedure for obtaining warranty service