UBCD396XT

28.Band Scope mode

Band Scope mode is a special type of Search mode where the scanner displays the strength of any signal it finds.

In a band scope search, the scanner starts at the lowest frequency in the range and moves up the search range.

In Max Hold Search mode, the scanner displays the strongest signal that it found.

If you manually set the mode to NFM or FM, the scanner will not reliably detect signals that are modulated in either FMB or WFM.

To turn on Band Scope mode:

Band Scope mode is the default setting for Search Key 3. To turn on Band Scope mode, enter Search mode, then tap FUNCTION + 3 (SR3). (To change the Search Key assignment, see Search Keys#Programming Search Keys.)

Reading the display in Band Scope mode

95

Page 109
Image 109
Uniden UBCD396XT owner manual To turn on Band Scope mode