Visioneer XP 470 manual Connect The Usb Cable

STEP 4: CONNECT THE USB CABLE 17

3.Turn on the power switch, located on the back of the scanner to the left of the power port.

The status light comes on and flashes indicating that the scanner is receiving power.

Now proceed to the next section, “Step 4: Connect the USB Cable.”

STEP 4: CONNECT THE USB CABLE

The Visioneer Strobe XP 470 scanner connects to any available USB port. Check your computer’s manual for USB port locations.

Note: You can connect the scanner to your computer while the computer is running. You do not have to shut down your computer.

1.Plug the USB cable into the USB port on the scanner and then into a USB port on the computer. The ports are identified with the USB symbols.

USB

You can also connect the scanner to a USB hub. If you use a USB hub, it must have its own power supply already plugged into an electrical outlet.