6VISIONEER STROBE XP 470 SCANNER USERS GUIDE

STEP 1: ASSEMBLE THE SCANNER

To assemble the scanner:

1.Remove all shipping tape from the top and bottom of the scanner.

2.Carefully remove the protective foam from the ADF cover release, then press the release and open the automatic document feeder cover.

ADF Cover

Release

3.Carefully remove any foam particles that may have gotten inside the document feeder, and close the cover.

4.Align the slots on the paper guide with the ridges on the scanner and slide it down until it snaps into place.

Page 13
Image 13
Visioneer XP 470 manual Assemble the Scanner, To assemble the scanner