Visioneer XP 470 manual From the Scanner list, choose Visioneer Strobe XP

SCANNING FROM THE BASIC INTERFACE OR ADVANCED INTERFACE 97

The Folders pane (which shows folders for organizing your scanned images) is replaced by the Scan pane.

Scan pane

Choose Visioneer Strobe XP 470 from here

1.From the Scanner list, choose Visioneer Strobe XP 470.

2.In the “Scan what?” section, choose to scan a Document or Photograph.

If you want to change the format of the scanned item’s file name or file type before you start scanning, click Settings. The default file type for documents is .pdf and the default for photographs is .jpg.

3.Use the Single page items check box as follows:

■When the check box is selected, all pages in the automatic document feeder are scanned and placed as single pages on the PaperPort desktop.

■When the check box is not selected, all pages in the automatic document feeder are scanned, but not placed on the PaperPort desktop until you indicate the scanning job is finished by clicking Done on the PaperPort-Scanwindow.

4.Click the Scan button on the Scan pane.

The Basic Interface opens and you’re ready to start scanning.