16VISIONEER STROBE XP 470 SCANNER USERS GUIDE

STEP 3: CONNECT AND POWER ON THE SCANNER

Connect the power supply and power cord, and then turn the power on.

To connect your Visioneer Strobe XP 470 scanner:

1. Plug the power supply into the power port on the scanner.

Note: Only use the power supply (SA60-24 made by Sino-American) included with your scanner. Connecting any other type of power supply may damage your scanner, and will void its warranty.

2. Plug the power cord into the power supply and into a wall outlet.

Page 23
Image 23
Visioneer manual Connect and Power on the Scanner, To connect your Visioneer Strobe XP 470 scanner