VistaQuest N7227V5 Optional Phone module Supports the Ademco 4285 Phone module, Supported

Optional Output Relays • Up to 4 relays using one 4204 Relay Module.

• Actions programmable to respond to zone activity or manual keypad entries.

Optional Phone module • Supports the Ademco 4285 Phone module .

•Provides access to the system via on premises or off-premises phones for arming, disarming, etc., plus control of relay outputs.

Optional Long Range • Allows all messages that have been programmed to go to the primary

Radio telephone number to be reported additionally to a 7720 PLUS or 7820 radio.

Alarm Output • Provides a 12VDC, 2 AMP output that can drive the compatible sounders listed in the EXTERNAL SOUNDERS section (assumes a fully charged battery is connected).

•Steady output for Burglary/Panic, or temporal pulse sounding output for Fire notification, as required by UL.

•Uses current limiting circuitry for protection.

Auxiliary Power Output • Provides 12VDC, 500mA maximum. Uses current limiting circuitry for protection.

•This output interrupts for smoke detector reset if 4-wire smoke detectors are used.

Programming • Programmed options are stored in electrically erasable, non-volatile EEROM memory (information can be reprogrammed at any time and will not be lost in the event of a power loss).

•The system can be uploaded, downloaded, or controlled via an IBM compatible computer, using either Ademco’s V-Link®downloading software (Rev. 4 or higher) or Ademco’s Compass Windows downloading software, and a HAYES modem specified by Ademco.

Keypad programming consists of:

•Data field programming.

•Interactive (menu) mode programming.

For programming from a keypad, a 5137AD or 6139 2-line Alpha keypad must be connected (but need not necessarily stay in the system).

Communication Formats	• Ademco Low Speed (Standard or Expanded).
Supported	• Sescoa/Radionics (Standard or Expanded).
	• Ademco Express.
	• Ademco Contact ID.
Zone Descriptors	You can assign Alpha descriptors to all zones (useful only when using Alpha
	keypads and/or the 4285 Phone module).
AC Power Supply	Uses No. 1321, 120VAC plug-in transformer with 16.5VAC 25VA output.
	(1321CN in Canada)
Back-Up Battery	• Rechargeable (Gel type) 12VDC, 4AH minimum.

– 10 –