VistaQuest N7227V5 Communication Programming, Table of Contact ID Event Codes

TABLE OF CONTACT ID EVENT CODES

Code	Definition
110	Fire Alarm
121	Duress
122	Alarm, 24-hour Silent
123	Alarm, 24-hour Audible Panic
131	Alarm, Perimeter, Burg.
132	Alarm, Interior, Burg.
134	Alarm, Entry/Exit, Burg.
135	Alarm, Day/Night, Burg.
150	Alarm, 24 Hour Auxiliary
301	AC Power
302	Low System Battery/Battery Test Fail
333	Expansion Module Fail
353	Long Range Radio Trouble
373	Fire Loop Trouble

Code	Definition
374	Exit Error Alarm
380	Trouble (Global)
383	RF Sensor Tamper
384	RF Sensor Low Battery
401	O/C by User
406	Cancel by User
407	Remote Arm/Disarm (Download)
408	Quick Arm AWAY/MAX
441	Armed STAY/INSTANT, Quick Arm
	STAY/INSTANT
570	Bypass
601	Test, Manually Triggered
602	Periodic Test
606	AAV to follow

Communication Programming

Introduction

This section provides instructions for programming those fields that affect communications between the control and the central station.

Programming Procedure

Fields ✱40, ✱41, ✱42: Enter up to the number of digits shown. Do not fill unused spaces.

Enter 0–9,

#+ 11 for ‘✱’

#+ 12 for ‘#’

#+ 13 for a pause (2 secs)

Field ✱43 is also used as the Long Range Radio Subscriber Account Number

1.With at least one Alpha keypad (5137AD or 6139) connected to the system, power up the system. If necessary, refer to the FINAL POWER UP section for the power-up procedure. If you had previously connected the AC transformer to the control panel, you need only plug in the transformer (to 120VAC outlet) to power up the system.

2.Enter the programming mode by keying the following on the Alpha keypad: Installer code (4 1 1 1) + 8 + 0.

Press ✱40 PABX ACCESS CODE

Enter up to 4 digits if PABX is needed to access an outside line. If fewer than 4 digits are needed to be entered, exit by pressing [✱] and next field number (e.g., 41). To clear entries from field, press ✱40✱.

Press ✱41 PRIMARY PHONE No .

Enter up to 12 digits. If fewer than 12 digits entered, exit by pressing [ ✱] and next field number (e.g., 42). To clear entries from field, press ✱41✱.

Press ✱42 SECONDARY PHONE No.

Enter up to 12 digits. If fewer than 12 digits entered, exit by pressing [ ✱] and next field number (e.g., 43). To clear entries from field, press ✱42✱. If using the Paging feature, enter the pager number as the secondary phone number.

Press ✱ 43 SUBSCRIBER ACCOUNT. No. Central Station Account Number).

Enter 0–9; # + 11 for B; # + 12 for C; # + 13 for D; # + 14 for E; # + 15 for F (default).

Enter ✱ as the fourth digit if a 3-digit account number (for 3+1 dialer reporting format) is used. Enter 0 as the first digit of a 4-digit account number for Nos. 0000–0999. End field by pressing ✱ (and press next field).

See the blank Programming Form in the separate Programming Guide for examples of Account No. entries.

– 66 –