VistaQuest N7227V5 installation instructions Transmitter Module, Relay Module Phone Module

6127 REMOTE KEYPAD

6128 REMOTE KEYPAD

6137 REMOTE KEYPAD

6138 & 6139

REMOTE KEYPADS

4281L, 4281M, 4281H RF RECEIVERS (5700 System) and

5881L, 5881M, 5881H RF RECEIVERS (5800 System)

5800TM

TRANSMITTER MODULE

used with 5827BD Wireless 2-Way Keypad

4204 RELAY MODULE

4285 PHONE MODULE

7720PLUS/7820

1.Physical: 5-3/4" W x 4-3/4" H x 1" D (146mm x 121mm x 26mm).

2.Electrical: Voltage Input: 12VDC; Current Drain: 20mA.

3.Interface Wiring: Same as 4127.

1.Physical: 5-3/4" W x 4-3/4" H x 1" D (146mm x 121mm x 26mm).

2.Electrical: Voltage Input: 12VDC; Current Drain: 30mA.

3.Interface Wiring: Same as 4127.

1.Physical: 6-1/4" W x 4-3/4" H x 1" D (159mm x 121mm x 26mm).

2.Electrical: Voltage Input: 12VDC; Current Drain: 85mA.

3.Interface Wiring: Same as 4127.

1.Physical: 6-1/4" W x 4-3/4" H x 1" D (159mm x 121mm x 26mm).

2.Electrical: Voltage Input: 12VDC; Current Drain: 100mA.

3.Interface Wiring: Same as 4127.

1.Physical: 7-3/8" (188mm) W x 4-3/8" (112mm) H x 1-7/16" (37mm) D. Note: 10-7/8" (277mm) H with antenna.

2.Electrical: Voltage Input: 12VDC; Current Drain: 35mA.

3.Interface Wiring: Same as 4127.

4.Range: 200ft (60m) nominal indoors from wireless transmitters (the actual range to be determined with system in TEST mode).

5.Zones: (With the Ademco VISTA–10SE)

4281L (4281CN-L*):accepts up to 4 transmitters.

4281M/4281H (4281CN-H*):accepts up to 8 transmitters.

5881L (5882L*): accepts up to 8 transmitters.

5881M/5881H (5882H*): accepts up to 16 transmitters.

*Used in Canada

1.Physical: 2-1/4" W x 4-1/8" H x 7/8" D (57mm x 105mm x 22mm).

2.Electrical: Voltage Input: 12VDC; Current Drain: 20mA.

3.Interface Wiring: Same as 4127.

1.Physical: 6-1/2" W x 4-1/4" H x 1-1/4" D (169mm x 108mm x 32mm).

2.Electrical: Voltage Input: 12VDC; Current Drain: 15mA (Relays off). 180mA (Relays on).

3.Interface Wiring: Same as 4127.

4. Four Output Relays:	SPDT Contacts.
	Rating: 2A max at 28VDC/AC.

1.Physical: 6-1/2" W x 4-1/4" H x 1-1/4" D (169mm x 108mm x 32mm).

2.Electrical: Voltage Input: 12VDC; Current Drain: 160mA.

3.Device Address: Permanently set to address 4.

4.Interface Wiring: See 4285 PHONE MODULE section.

5.Telephone Line Connections: See 4285 PHONE MODULE section.

1.Physical: 8-1/2" W x 9-1/2" H x 1-3/4" D (216mm x 242mm x 45mm).

2.Electrical: Voltage Input: 12VDC; Current Drain: 150mA.

3.Device Address: Set to address 3.

4.Interface Wiring: Same as 4127 above.

– 81 –