4. Advanced Scanning
Using interactive preview (Single Page Mode)
Single page mode allows you to scan a stack of documents, one at a time, from the document feeder. In this mode, the top page is fed, scanned and kept in the scanner's memory until you either accept the scan or skip to the next page. This mode is designed to help you adjust image quality, as you can continue to reprocess the image without reloading the page in the feeder as many times as necessary.
NOTE: The selection for Single Page Mode is not saved in any Scan Tickets. If you select a scan ticket and you wish to scan one page at a time you must manually select the Single Page Mode checkbox.
To use interactive preview (single page mode), use the following procedure
1.
2.
3.
4.
5.
6.
7.
8.
Setup your scan on the Basic tab.
Load pages in the document feeder.
Select the Single Page Mode check box.
Click Preview.
Click the Image Size tab and crop, frame or resize the image if desired. (You cannot preview the effects of Image Size adjustments, but you can use the preview window for positioning the bounding box.)
Click the Image Quality tab.
Adjust image quality controls one at a time as necessary, and click Reprocess after each adjustment to see its effect. When you are satisfied, click Accept to keep your changes
and pass the scanned image back to your scanning application.
NOTE: If you have selected Options: Single Page Mode: Automatically Preview Next Image then the green button will be labeled "Next," not "Accept." When you click Next, your changes are saved, the image is sent to your scanning application, and the scanner automatically previews the next document on the stack.
FreeFlow Scanner 665E Operator Manual |
