1. Overview
Control Panel
The scanner includes a control panel on the front right corner. Use these controls to start and stop scans as well as monitoring the status of the scanner.
The control panel consists of the following components:
Start button (green): Press this button to start a scan.
Stop button (red): Press this button to cancel a scan. The page currently being scanned will complete the scan process.
Status LED (green): Remains constantly lit when the scanner is ready to scan and is dark whenever a scan is in progress.
Fault LED (yellow): Flashes when a fault has occurred, requiring corrective action.
Power switch
The on/off switch is located on the rear of the right side panel.
Power switch
When you switch on the power, a yellow status LED on the control panel begins to flash. Wait until the scanner makes an audible "click" sound and the green status LED lights before turning on power to the PC.
For more information about powering on/off the system, refer to page
FreeFlow Scanner 665E Operator Manual |
