Xerox 701P44148 manual Scan and print a large job

3. Scan and Print

Scan and print a large job

KEY POINT: This book uses illustrations showing a DocuColor 8000 Digital Press connected to a Fiery EXP8000 color

server. Your system may vary depending on the digital press and color server for your work environment.

You can use Scan and Print to build large copying jobs with the Scan to Job button. Large jobs are defined as those with page counts that exceed the capacity of the scanner’s multisheet feeder; refer to Chapter 10 on page 10-1for the capacity of this scanner.

Scan to Job button

Follow these steps when scanning large jobs.

1.With the Scan and Print application open, place the first portion of your job into the multisheet feeder.

2.Select your job options; refer to Steps 2-8of the “Scan and print an original” on page 3-4.

3.Select the Scan to Job button.

4.After the first portion of your job is scanned, place the second portion of your job into the multisheet feeder.

5.

6.

7.

Repeat Steps 2-4until your entire job is scanned.

Select Print Job; your job is submitted to the selected printer. When you are finished, close the Scan and Print application.

FreeFlow Scanner 665E Operator Manual 3-7