Using the Document Glass

Use the document glass under the following conditions:

•The document is old, fragile, or torn

•The document stock is lighter than 13 lb. or heavier than 32# lb.

•The document is on coated stock, inkjet paper, photographic paper, or other rigid media

•The document is larger than 11.7 x 17 inches

•The document is bound

NOTE: Scan fragile documents, photographs (printed on photographic stock), inkjet papers, and bound documents on the Document Glass.

Scanning a 1 or 2-sided document

To scan a 1 or 2-sided document:

1.Raise the document glass cover.

2.Place the document on the document glass, registering it in the upper left corner.

3.Close the document glass cover.

4.Make the desired selections from the Scan and Print application.

The Scan and Print application is discussed in Chapter 3 on page 3-1.

5.If desired, make additional selections from Advanced Scanning.

NOTE: If scanning a 2-sided document, be sure to select the 2-sided option from Scan and Print/Advanced Scanning.

6.When satisfied with settings, click Scan (from Scan and Print/Advanced Scanning).

NOTE: If scanning a 2-sided document, turn the document over and repeat steps Step 4 through Step 6 for the second side.

1-20	FreeFlow Scanner 665E Operator Manual