Xerox 701P44148 manual Pamphlet signatures Document height is

5. Job Ticket/Job Setup

Job Type: Select the specific job type from the drop-down list. There are three primary job types, some with subtypes:

•Standard: Prints the document pages in sequential order, using single sheets of paper stock. A standard job can be

1-sided (simplex), 2-sided (duplex) or Head-To-Toe (duplex).

•Signature: Prints the document pages non-sequentially, to produce folded output. Signature jobs are always duplex. Some finishing options may be disabled when printing signatures. You can use the Autofit option to scale images in a Signature job in the job ticket.

– Book signatures: Document width is greater than

the height, and pages are duplex.

– Calendar signatures: Document height is greater than the width, and pages are head-to-toe.

– Pamphlet signatures: Document height is

greater than the width, and pages are duplex.

•N Up: Prints the same page an N amount of times on the output paper. The options available for each N Up option differ for each N Up option.

– 2-Up:Prints the same page twice, side by side,

on one side of a page. You can change the paper size, if necessary. Image Shift is not available.

– 2-Up flip left: Prints the same page twice, side

by side, on one side of a page, with the left-side image rotated 180 degrees. You can change the paper size, if necessary. The Orientation depends on the N-Up type you choose. Image Shift is not available for 2-Up flip left. This option is often selected when using offline cutting and binding.

FreeFlow Scanner 665E Operator Manual 5-7