Zebra Technologies 105SL Plus manual 101

		Printer Configuration and Adjustment	101
		Changing Printer Settings
	Table 10 • Language Settings (Continued)
Command	Set the Format Command Prefix Value
Character	The format command prefix is a two-digit hex value used as a parameter place marker in
	ZPL/ZPL II format instructions. The printer looks for this hex character to indicate the start
	of a ZPL/ZPL II format instruction.
	Set the format command prefix character to match what is used in your label formats.
	Important • You cannot use the same hex value for the format command prefix,
	control character, and delimiter characters. The printer must see different characters
	to work properly. If you are setting the value through the control panel, the printer
	will skip any value that is already in use.
	Accepted values: 00 to FF
	Related ZPL command(s): ^CC or ~CC
	SGD command used:	none
	Control panel menu item: FORMAT PREFIX on page 29
	Printer web page: View and Modify Printer Settings > ZPL Control
Delimiter	Set the Delimiter Character Value
Character	The delimiter character is a two-digit hex value used as a parameter place marker in
	ZPL/ZPL II format instructions.
	Set the delimiter character to match what is used in your label formats.
	Accepted values: 00 to FF
	Related ZPL command(s): ^CD or ~CD
	SGD command used:	none
	Control panel menu item: DELIMITER CHAR on page 29
	Printer web page: View and Modify Printer Settings > ZPL Control
ZPL Mode	Set the ZPL Mode
	Select the ZPL mode that matches what is used in your label formats.
	This printer accepts label formats written in either ZPL or ZPL II, eliminating the need to
	rewrite any ZPL formats that already exist. The printer remains in the selected mode until it
	is changed in one of the ways listed here.

Accepted values: • ZPL II

•ZPL

Related ZPL command(s): ^SZ SGD command used: none

Control panel menu item: ZPL MODE on page 29

Printer web page: View and Modify Printer Settings > ZPL Control

7/3/13 P1056468-002