Printer Configuration and Adjustment 105
Changing Printer Settings
Table 12 • Port Settings (Continued)
Host Handshake Set the Host Handshake Protocol Value
Select the handshake protocol that matches the one being used by the host computer.
| Accepted values: | • | XON/XOFF |
|
| • | RTS/CTS |
|
| • | DSR/DTR |
| Related ZPL command(s): | ^SC | |
| SGD command used: | none | |
| Control panel menu item: | ||
| Printer web page: | View and Modify Printer Settings > | |
|
|
| Serial Communications Setup > |
|
|
| Host Handshake |
|
| ||
Protocol | Protocol is a type of error checking system. Depending on the selection, an indicator | ||
| may be sent from the printer to the host computer signifying that data has been received. | ||
| Select the protocol that is requested by the host computer. | ||
| Accepted values: | • | NONE |
|
| • | ZEBRA |
|
| • | ACK_NAK |
|
|
| Note • ZEBRA is the same as ACK_NAK, |
|
|
| except that ZEBRA response messages are |
|
|
| sequenced. If ZEBRA is selected, the printer |
|
|
| must use DSR/DTR for host handshake |
|
|
| protocol. |
| Related ZPL command(s): | ^SC | |
| SGD command used: | none | |
| Control panel menu item: | ||
| Printer web page: | View and Modify Printer Settings > | |
|
|
| Serial Communications Setup > Protocol |
|
| ||
Network ID | This parameter assigns a unique number to the printer when the printer is operating in | ||
| an RS422/485 | ||
| required). This gives the host computer the means to address a specific printer. This | ||
| does not affect TCP/IP or IPX networks. Set a unique network ID number for this | ||
| printer. |
|
|
| Accepted values: | 000 to 999 | |
| Related ZPL command(s): | ^NI | |
| SGD command used: | none | |
| Control panel menu item: | ||
| Printer web page: | View and Modify Printer Settings > | |
|
|
| Serial Communications Setup > Network ID |
7/3/13 |