Zebra Technologies 105SL Plus Operating Parameters on the Control Panel

Introduction 21

Control Panel Display

Operating Parameters on the Control Panel

Items in this menu are shown in the order in which they appear when you press the RIGHT ARROW. For more information about these settings, see Print Settings on page 83.

Adjust the Print Darkness

Set the darkness to the lowest setting that provides good print quality. If you set the darkness too high, the label image may print unclearly, bar codes may not scan correctly, the ribbon may burn through, or the printhead may wear prematurely.

See Print Darkness on page 83 for more information.

Select the Print Speed

Select the speed for printing a label (given in inches per second).

Slower print speeds typically yield better print quality.

See Print Speed on page 83 for more information.

Adjust the Tear-Off Position

If necessary, adjust the position of the media over the tear-off bar after printing.

See Tear-Off Position on page 84 for more information.

Select the Print Mode

Select a print mode that is compatible with your printer options.

See Print Mode on page 84 for more information.

7/3/13 P1056468-002