Zebra Technologies 105SL Plus manual 28

28Introduction Control Panel Display

Set the Parity Value

Select the parity value that matches the one being used by the host computer.

See Parity on page 104 for more information.

Set the Host Handshake Protocol Value

Select the handshake protocol that matches the one being used by the host computer.

See Host Handshake on page 105 for more information.

Set the Zebra Protocol Value

Protocol is a type of error checking system. Depending on the selection, an indicator may be sent from the printer to the host computer signifying that data has been received. Select the protocol that is requested by the host computer.

See Protocol on page 105 for more information.

Set the Network ID

This parameter assigns a unique number to the printer when the printer is operating in an RS422/485 multi-drop network environment (an external RS422/485 adapter is required). This gives the host computer the means to address a specific printer. This does not affect TCP/IP or IPX networks. Set a unique network ID number for this printer.

See Network ID on page 105 for more information.

Enable Communication Diagnostics Mode

Use this diagnostics tool to cause the printer to output the hexadecimal values for all data received by the printer.

See Communication Diagnostics Mode on page 94 for more information.

P1056468-002 7/3/13