Introduction 33

Control Panel Display

View if IP Settings Are Loaded from the Printer or Print Server

This parameter tells whether to use the printer’s or the print server’s LAN/WLAN settings at power-up. The default is to use the printer’s settings.

See Load from External Device on page 96 for more information.

View the Active Print Server*

This menu item displays which print server is being used. This tells which device’s settings such as IP protocol and IP address are being displayed under those menu items.

*This menu item, which cannot be modified from the control panel, appears only if a wired or wireless print server is installed in your printer.

Set the IP Resolution Method*

This parameter tells if the user (permanent) or the server (dynamic) selects the IP address. If a dynamic option is chosen, this parameter tells the method(s) by which the wired or wireless print server receives the IP address from the server.

See IP Protocol on page 97 for more information.

*This menu item appears only if a wired or wireless print server is installed in your printer.

Set the Printer’s IP Address*

View and, if necessary, change the printer’s IP address.

Changes are saved only if IP PROTOCOL is set to PERMANENT. To allow any saved changes to take effect, use RESET NETWORK on page 35 to reset the print server.

See IP Address on page 97 for more information.

*This menu item appears only if a wired or wireless print server is installed in your printer.

7/3/13

P1056468-002