Specifications 165
Ribbon Specifications
Black Mark SensingMedia Specifications |
| 203 dpi | 300 dpi | |
|
|
|
| |
Mark length (measuring parallel | Minimum | 0.12 in. (3 mm) | 0.12 in. (3 mm) | |
to label/tag edge) |
|
|
| |
Maximum | 0.43 in. (11 mm) | 0.43 in. (11 mm) | ||
| ||||
|
|
|
| |
Mark width (measuring to | Minimum | 0.43 in. (11 mm) | 0.43 in. (11 mm) | |
perpendicular |
|
|
| |
Maximum | Full media width | Full media width | ||
label/tag edge) | ||||
|
|
| ||
|
|
|
| |
Mark location |
| within 0.040 in. (1 mm) of | within 0.040 in. (1 mm) of | |
|
| the inside media edge | the inside media edge | |
|
|
| ||
Mark density in Optical Density Unit (ODU) | >1.0 | >1.0 | ||
|
|
|
| |
Ribbon Specifications
Refer to the following tables for ribbon specifications.
Note • Consider the following when using ribbon:
• Match the ribbon to the label width and printhead width that you are using. The ribbon should be at least as wide as the labels to protect the printhead from excessive wear.
• Ribbon must be wound with the coated side out.
Ribbon Specifications | 203 dpi | 300 dpi |
|
|
|
Printhead resolution | 203 dots/inch | 300 dots/inch |
| (8 dots/mm) | (12 dots/mm) |
|
|
|
Ribbon width Minimum | 0.79 in. (20 mm) | 0.79 in. (20 mm) |
|
|
|
Ribbon width Maximum | 4.33 in. (110 mm) | 4.33 in. (110 mm) |
|
|
|
Maximum ribbon length | 1476 ft (450 m) | 1476 ft (450 m) |
|
|
|
Ribbon core inside diameter | 1.0 in. (25.4 mm) | 1.0 in. (25.4 mm) |
|
|
|
Maximum ribbon roll outside | 3.2 in. (81.3 mm) | 3.2 in. (81.3 mm) |
diameter |
|
|
|
|
|
7/3/13 |