38Printer Setup and Operation Handling the Printer
Handling the Printer
This section describes how to handle your printer.
Unpack and Inspect the Printer
Important • Zebra Technologies is not responsible for any damage incurred during the shipment of the equipment and will not repair this damage under warranty.
When you receive the printer, do the following:
1.Immediately unpack the printer.
2.Check all exterior surfaces for damage.
3.Raise the media door, and inspect the media compartment for damage to components.
4.If you discover shipping damage during inspection, do the following:
•Immediately notify the shipping company, and file a damage report.
•Keep all packaging material for shipping company inspection.
•Notify your authorized Zebra reseller.
To Store the Printer
If you are not placing the printer into immediate operation, repackage it using the original packing materials. You may store the printer under the following conditions:
•Temperature:
•Relative humidity: 5% to 85%
To Ship the Printer
Save all packing materials in case you need to ship the printer in the future.
To ship the printer, do the following:
1.Turn off (O) the printer, and disconnect all cables.
2.Remove any media, ribbon, or loose objects from the printer interior.
3.Close the printhead.
4.Carefully pack the printer into the original container or a suitable alternate container to avoid damage during transit. A shipping container can be purchased from Zebra if the original packaging has been lost or destroyed.
7/3/13 |