110Printer Configuration and Adjustment Calibrate the Ribbon and Media Sensors Manually

8.Press PAUSE to begin the media calibration process. The control panel displays:

CALIBRATING

PLEASE WAIT

When the process is complete, the control panel displays:

RELOAD ALL

9.Rotate the printhead-open lever (1) to the open position.

1

10.Reload the media and ribbon (if used). With preprinted or black mark media, make sure that an area without preprinting or without a black mark is over the media sensor.

11.Push down the printhead assembly (1), and then rotate the printhead-open lever (2) until it locks into place.

21

P1056468-002

7/3/13