Printer Configuration and Adjustment 97
Changing Printer Settings
Table 9 • Network Settings (Continued)
IP Protocol | Set the IP Resolution Method |
|
|
| This parameter tells if the user (permanent) or the server (dynamic) selects the | ||
| IP address. If a dynamic option is chosen, this parameter tells the method(s) by which | ||
| the wired or wireless print server receives the IP address from the server. | ||
| Accepted values: | • | ALL |
|
| • | GLEANING ONLY |
|
| • | RARP |
|
| • | BOOTP |
|
| • | DHCP |
|
| • | DHCP & BOOTP |
|
| • | PERMANENT |
| Related ZPL command(s): | ^ND | |
| SGD command used: | Wired: internal_wired.ip.protocol | |
|
|
| external_wired.ip.protocol |
|
| Wireless: wlan.ip.protocol | |
| Control panel menu item: | ||
| Printer web page: | View and Modify Printer Settings > | |
|
|
| Network Communications Setup > |
|
|
| TCP/IP Settings > IP Protocol |
|
| ||
IP Address | View or Set the Printer’s IP Address | ||
| View and, if necessary, change the printer’s IP address. | ||
| Changes to this setting are saved only if IP PROTOCOL is set to PERMANENT. To | ||
| allow any saved changes to take effect, reset the print server (see Reset Network | ||
|
|
| |
| Accepted values: | 000 to 255 for each field | |
| Related ZPL command(s): | ^ND | |
| SGD command used: | Wired: internal_wired.ip.addr | |
|
|
| external_wired.ip.addr |
|
| Wireless: ip.addr, wlan.ip.addr | |
| Control panel menu item: | ||
| Printer web page: | View and Modify Printer Settings > | |
|
|
| Network Communications Setup > |
|
|
| TCP/IP Settings > IP Address |
|
|
|
|
7/3/13 |