Introduction 19
Control Panel Display
Table 2 • Navigation (Continued)
Exit Setup Mode
1. At the Idle Display (Figure 3), press SETUP to enter Setup Mode. The printer displays the first parameter.
2.While in Setup Mode, press SETUP/EXIT to exit the operating parameters.
The LCD displays SAVE CHANGES.
3. To return to the parameters, plus PREVIOUS.
OR
Press PLUS (+) or MINUS (-)to scroll through the exit options:
• PERMANENT—Stores values in the printer even when power is turned off.
• TEMPORARY—Saves the changes until power is turned off.
• CANCEL—This option cancels all changes made since you entered Setup mode, except for changes made to DARKNESS, TEAR OFF, COMMUNICATION, and LANGUAGE settings, which go into effect as soon as they are made.
• LOAD DEFAULTS—Use this option to restore all settings other than the network settings back to the factory defaults. Use care when loading defaults because you will need to reload all settings that you changed manually.
• LOAD LAST SAVE—Loads the values from the last permanent save.
• DEFAULT NET—Use this option to restore all print server and network settings back to the factory defaults. Use care when loading defaults because you will need to reload all settings that you changed manually.
4.Press NEXT/SAVE to select the displayed choice and exit Setup Mode.
When the configuration and calibration sequence finishes, the printer returns to the Idle Display.
