62Printer Setup and Operation Load the Media
Roll Media (Continued)
c.Place the roll of media on the media supply hanger. Push the roll back as far as it will go.
d.Slide in the media supply guide until it touches the edge of the roll.
Fanfold Media (Continued)
c.Drape the media over the media supply hanger.
d.Slide in the media supply guide until it touches the edge of the media.
5.Thread the media under the media dancer assembly roller (1), the media guide roller (2), and then the upper media sensor (3).
Important • Make sure that you thread the media under these components. If you thread
the media over them, the media obstructs the ribbon sensor and causes a false
RIBBON OUT error.
3
2
1
7/3/13 |