34Introduction Control Panel Display

Set the Subnet Mask*

View and, if necessary, change the subnet mask.

Changes are saved only if IP PROTOCOL is set to PERMANENT. To allow any saved changes to take effect, use RESET NETWORK on page 35 to reset the print server.

See Subnet Mask on page 98 for more information.

*This menu item appears only if a wired or wireless print server is installed in your printer.

Set the Default Gateway*

View and, if necessary, change the default gateway.

Changes are saved only if IP PROTOCOL is set to PERMANENT. To allow any saved changes to take effect, use RESET NETWORK on page 35 to reset the print server.

See Default Gateway on page 98 for more information.

*This menu item appears only if a wired or wireless print server is installed in your printer.

View the MAC Address*

View the Media Access Control (MAC) address of the print server that is installed in the printer (wired or wireless).

See MAC Address on page 98 for more information.

*This menu item, which cannot be modified from the control panel, appears only if a wired or wireless print server is installed in your printer.

View the ESSID Value*

The Extended Service Set Identification (ESSID) is an identifier for your wireless network. This setting, which cannot be modified from the control panel, gives the ESSID for the current wireless configuration.

See ESSID on page 99 for more information.

*This menu item, which cannot be modified from the control panel, appears only if a wireless print server is installed in your printer.

P1056468-002

7/3/13