26Introduction Control Panel Display

Print Network Configuration Label

This option prints a configuration label (see Figure 14

on page 149), which lists the settings for any print server that is installed.

See Print Information on page 91 for more information.

Print All Labels

This option prints labels that list the available fonts, bar codes, images, formats, and the current printer and network configurations.

See Print Information on page 91 for more information.

Initialize Flash Memory

This option erases all previously stored information from Flash memory.

1.If prompted for a password, enter the printer password. For instructions, see Changing Password-Protected Parameters on page 20.

The display shows INITIALIZE FLASH?

2.Press PLUS (+) to select YES.

The display shows ARE YOU SURE?.

3.Do you want to continue?

Press MINUS (-)to select NO to cancel the request and return to the INITIALIZE FLASH prompt.

Press PLUS (+) to select YES and begin initialization. When initialization is complete, the control panel displays

INITIALIZING COMPLETED.

Note • Initializing memory can take several minutes.

See Initialize Flash Memory on page 91 for more information.

Print a Sensor Profile

Use this menu item to print a sensor profile.

See Print a Sensor Profile on page 91 for more information.

P1056468-002

7/3/13