86Printer Configuration and Adjustment Changing Printer Settings

Table 7 • Print Settings (Continued)

Maximum Set the maximum label length to a value that is at least 1.0 in. (25.4 mm) greater than the Label Length actual label length plus the interlabel gap. If you set the value to one that is smaller than the

label length, the printer assumes that continuous media is loaded, and the printer cannot calibrate.

For example, if the label length is 6.0 inches (152 mm) including the interlabel gap, set the parameter for at least 7.0 inches (178 mm).

1

3

 

2

1Label length (including interlabel gap)

2Interlabel gap

3Set the maximum label length to approximately this value

Accepted values: 0 to the maximum label length supported by the printer

Related ZPL command(s): ^ML

SGD command used: none

Control panel menu item: MAXIMUM LENGTH on page 22

Printer web page: View and Modify Printer Settings > Media Setup >

Maximum Length

P1056468-002

7/3/13