| Printer Configuration and Adjustment |
| 109 | |
|
| |||
| Calibrate the Ribbon and Media Sensors Manually |
|
| |
|
|
| ||
If you are using… | Then… | |||
|
| |||
Black mark media | a. Set the sensor type to MARK. (See Sensor Type on page 102.) |
| ||
b.Position a black mark over the red light from the black mark media sensor.
Media where labels are | a. Remove the media from between the media sensors. |
separated by holes or notches |
|
5.Press PLUS (+) to continue. The control panel displays:
REMOVE RIBBON
6.Remove the ribbon (if used).
7.Push down the printhead assembly (1), and then rotate the
21
7/3/13 |