92Printer Configuration and Adjustment Changing Printer Settings
Table 8 • Maintenance and Diagnostic Tools (Continued)
Set the action for the printer to take during the
•CALIBRATE adjusts sensor levels and thresholds, determines the label length, and feeds the media to the next web.
•
•LENGTH determines the label length using current sensor values, and feeds the media to the next web.
•NO MOTION tells the printer not to move the media. You must manually ensure that the web is positioned correctly, or press feed to position the next web.
•SHORT CAL sets the media and web thresholds without adjusting sensor gain, determines the label length, and feeds the media to the next web.
Accepted values: • | CALIBRATE |
• | FEED |
• | LENGTH |
• | NO MOTION |
• | SHORT CAL |
Related ZPL command(s): ^MF
SGD command used: none
Control panel menu item: MEDIA POWER UP on page 29
Printer web page: View and Modify Printer Settings > Calibration
Set the |
| |
Action | Set the action for the printer to take when you close the printhead. | |
| • CALIBRATE adjusts sensor levels and thresholds, determines the label length, and | |
| feeds the media to the next web. |
|
| • | |
| • LENGTH determines the label length using current sensor values, and feeds the | |
| media to the next web. |
|
| • NO MOTION tells the printer not to move the media. You must manually ensure | |
| that the web is positioned correctly, or press feed to position the next web. | |
| • SHORT CAL sets the media and web thresholds without adjusting sensor gain, | |
| determines the label length, and feeds the media to the next web. | |
| Accepted values: • | CALIBRATE |
| • | FEED |
| • | LENGTH |
| • | NO MOTION |
| • | SHORT CAL |
Related ZPL command(s): ^MF
SGD command used: none
Control panel menu item: HEAD CLOSE on page 30
Printer web page: View and Modify Printer Settings > Calibration
7/3/13 |