Printer Setup and Operation 69
Load the Media
12.Wind the media liner counterclockwise around the rewind spindle.
a.Reinstall the hook. Insert the short end of the hook into the hole in the center of the adjusting nut (1). Insert the long end of the hook into the small hole on the guide plate (2).
2
1
b.Rotate the spindle counterclockwise several turns to wind the media liner over the hook and remove any slack.
13.Align the media with the inner media guide (1). Slide in the outer media guide (2) until it just touches the edge of the media.
1
2
7/3/13 |