96Printer Configuration and Adjustment Changing Printer Settings

Network Settings

Table 9 • Network Settings

Primary Network

Select the Primary Network Device

 

This parameter determines which device should be considered primary in the active

 

device selection.

 

 

 

Accepted values:

•

WIRED

 

 

•

WIRELESS

 

Related ZPL command(s):

^NC

 

SGD command used:

ip.primary_network

 

Control panel menu item:

PRIMARY NETWORK on page 32

 

Printer web page:

none

 

 

Load from

View if IP Settings Are Loaded from the Printer or Print Server

External Device

This parameter tells whether to use the printer’s or the print server’s LAN/WLAN

 

settings at power-up. The default is to use the printer’s settings.

 

Accepted values:

•

YES

 

 

•

NO

 

Related ZPL command(s):

^NP

 

SGD command used:

none

 

Control panel menu item:

LOAD FROM EXT? on page 33

 

Printer web page:

none

 

 

 

 

Active Print

View the Active Print Server

 

 

Server

This menu item displays which print server is being used. This tells which device’s

 

settings such as IP protocol and IP address are being displayed under those menu items.

 

Accepted values:

• WIRELESS indicates that the wireless print server

 

 

 

is active.

 

 

• INTERNAL WIRED indicates that the internal

 

 

 

wired print server is active.

 

 

• EXTERNAL WIRED indicates that an external

 

 

 

wired print server is active.

 

 

• NONE indicates that one of the network options is

 

 

 

installed but is not active. When NONE is shown

 

 

 

for this menu item, the device-specific items such

 

 

 

as IP protocol and IP address will not display.

 

Related ZPL command(s):

none

 

SGD command used:

none

 

Control panel menu item:

ACTIVE PRINTSRVR on page 33

 

Printer web page:

none

 

 

 

 

P1056468-002

7/3/13