Introduction 31

Control Panel Display

Set the Reprint Mode

When reprint mode is enabled, you can reprint the last label printed either by issuing certain commands or by pressing the LEFT ARROW on the control panel.

See Reprint Mode on page 88 for more information.

View Sensor Settings

The following parameters are automatically set during the calibration procedure and should be changed only by a qualified service technician.

Select Format Conversion Scaling Factor

Selects the bitmap scaling factor. The first number is the original dots per inch (dpi) value; the second, the dpi to which you would like to scale.

See Format Conversion on page 94 for more information.

7/3/13

P1056468-002