24Introduction Control Panel Display

Reset New Printhead Counter for Early Warning*

•If you received the message WARNING REPLACE HEAD, replace the printhead, and then press PLUS (+) to select YES to reset the Early Warning for Maintenance printhead replacement counter.

•If you have not replaced the printhead, press MINUS (-)to select NO.

*This parameter appears only if Early Warning for Maintenance is enabled.

View the Non-Resettable Counter

This parameter displays the total length of media that the printer has printed.

See Non-Resettable Counter on page 90 for more information.

View User-Controlled Counter 1

This parameter displays the total length of media that the printer has printed since this counter was last reset.

See User-Controlled Counters on page 90 for more information.

View User-Controlled Counter 2

This parameter displays the total length of media that the printer has printed since this counter was last reset.

See User-Controlled Counters on page 90 for more information.

Print Counter Readings

Prints a label that lists the odometer readings for the following:

•the non-resettable counter

•the two user-controlled counters

•the Early Warning for Maintenance counters, which indicate when the printhead was last cleaned and the printhead life (If the Early Warning for Maintenance feature is disabled, the counters related to it do not print.)

See Print Counter Readings on page 90 for more information.

P1056468-002

7/3/13