Printer Configuration and Adjustment 89
Changing Printer Settings
Maintenance and Diagnostic Tools
Table 8 • Maintenance and Diagnostic Tools
Supplies Low | When this feature is enabled, the printer provides warnings when the media or ribbon is | |
Warning | reaching near the end of the roll. |
|
| Accepted values: | MEDIA DISABLED, MEDIA ENABLED |
| Related ZPL command(s): | ^JH |
| SGD command used: | none |
| Control panel menu item: | |
| Printer web page: | View and Modify Printer Settings > General Setup |
|
| > Early Warning (Media) |
|
| |
Early Warning | When this feature is enabled, the printer provides warnings when the printhead needs to | |
for Maintenance | be cleaned. |
|
| Accepted values: | MAINT. OFF, MAINT. ON |
| Related ZPL command(s): | ^JH |
| SGD command used: | none |
| Control panel menu item: | |
| Printer web page: | View and Modify Printer Settings > General Setup |
|
| > Early Warning (Maintenance) |
|
| |
Printhead | When Early Warning for Maintenance is enabled, set this value to the length of the | |
Cleaning Interval | media or ribbon roll that you are using. | |
| When the printhead reaches the set length, WARNING CLEAN PRINTHEAD appears on | |
| the control panel display. If the alert function is enabled, the printer generates an alert. | |
| Accepted values: | 0 M/0 FT to 450M/1476 FT in 50 M increments |
| Related ZPL command(s): | ^JH |
| SGD command used: | none |
| Control panel menu item: | |
| Printer web page: | View and Modify Printer Settings > General Setup |
|
| > Head Cleaning |
|
| |
Printhead Life | When Early Warning for Maintenance is enabled, set this value to the number of inches | |
Expectancy | of media that the printhead is expected to print. | |
| When the printhead reaches the set length, WARNING REPLACE HEAD appears on the | |
| control panel display. If the alert function is enabled, the printer generates an alert. | |
| Accepted values: | 0 M/0 FT to 450M/1476 FT in 50 M increments |
| Related ZPL command(s): | ^JH |
| SGD command used: | none |
| Control panel menu item: | |
| Printer web page: | View and Modify Printer Settings > General Setup |
|
| > Head Life |
|
|
|
7/3/13 |