Introduction 23

Control Panel Display

Set Supplies Low Warning

When this feature is enabled, the printer provides warnings when the media or ribbon is reaching near the end of the roll.

See Supplies Low Warning on page 89 for more information.

Set Early Warning for Maintenance

When this feature is enabled, the printer provides warnings when the printhead needs to be cleaned.

See Early Warning for Maintenance on page 89 for more information.

Set Printhead Cleaning Interval*

When Early Warning for Maintenance is enabled, set this value to the length of the media or ribbon roll that you are using.

See Printhead Cleaning Interval on page 89 for more information.

*This parameter appears only if Early Warning for Maintenance is enabled.

Reset Printhead Cleaning Counter for Early Warning*

•If you received the message WARNING CLEAN PRINTHEAD, clean the printhead, and then press PLUS to select YES to reset the Early Warning for Maintenance printhead cleaning counter.

•If you have not cleaned the printhead, press MINUS to select

NO.

*This parameter appears only if Early Warning for Maintenance is enabled.

Set Printhead Life Expectancy*

When Early Warning for Maintenance is enabled, set this value to the number of inches of media that the printhead is expected to print.

See Printhead Life Expectancy on page 89 for more information.

*This parameter appears only if Early Warning for Maintenance is enabled.

7/3/13

P1056468-002