Printer Configuration and Adjustment 95
Changing Printer Settings
Table 8 • Maintenance and Diagnostic Tools (Continued)
Idle Display | Select the information shown on the printer’s display when the printer is idle. | ||
| Accepted values: | • | FIRMWARE (FW) VERSION |
|
| • | MM/DD/YY 24 HR |
|
| • | M/DD/YY 12 HR |
|
| • | DD/MM/YY 24 HR |
|
| • | DD/MM/YY 12 HR |
| Related ZPL command(s): | none | |
| SGD command used: | none | |
| Control panel menu item: | ||
| Printer web page: | N/A | |
|
| ||
RTC Date | This parameter allows you to set the date to display in the Idle Display. | ||
| Related ZPL command(s): | ^ST | |
| SGD command used: | none | |
| Control panel menu item: | ||
| Printer web page: | none | |
|
| ||
RTC Time | This parameter allows you to set the time to display in the Idle Display. | ||
| Related ZPL command(s): | ^ST | |
| SGD command used: | none | |
| Control panel menu item: | ||
| Printer web page: | none | |
|
| ||
Password Level | This parameter allows you to select whether certain | ||
| menu items are password protected. |
| |
| Accepted values: | • | SELECTED ITEMS |
|
| • | ALL ITEMS |
| Related ZPL command(s): | none | |
| SGD command used: | none | |
| Control panel menu item: | ||
| Printer web page: | none | |
|
| ||
Run a ZBI | If you have ZBI 2.0 installed, you may choose to run a ZBI program that you have | ||
Program | downloaded to your printer. |
|
|
| Accepted values: | N/A | |
| Related ZPL command(s): | ^JI, ~JI | |
| SGD command used: | zbi.control.run | |
| Control panel menu item: | ||
| Printer web page: | Directory Listing | |
|
|
|
|
7/3/13 |