32Introduction Control Panel Display

Select the Idle Display

Select the information shown on the printer’s display when the printer is idle.

See Idle Display on page 95 for more information.

Set the Real-Time Clock (RTC) Date

This parameter allows you to set the date to display in the Idle

Display.

See RTC Date on page 95 for more information.

Set the Real-Time Clock (RTC) Time

This parameter allows you to set the date to display in the Idle

Display.

See RTC Time on page 95 for more information.

Run the Specified ZBI Program*

•To run the ZBI program selected by the previous menu item, press PLUS (+).

•If you did not replace the ribbon, press MINUS (-)to select CANCEL, or press the LEFT ARROW or RIGHT ARROW to move to another parameter.

See Run a ZBI Program on page 95 for more information.

*This menu item appears only if ZBI is enabled on your printer and no ZBI program is running.

Select the Primary Network Device

This parameter determines which device should be considered primary in the active device selection.

See Primary Network on page 96 for more information.

P1056468-002

7/3/13