Zebra Technologies 105SL Plus Media Specifications

164Specifications Media Specifications

Media Specifications

Use the correct size and type of labels for best performance. Refer to the tables that follow for specifications.

Important • Media registration and minimum label length are affected by label type and width, ribbon type, print speed, and printer mode of operation. Performance improves as these factors are optimized. Zebra recommends qualifying any application with thorough testing.

		110
Media Specifications		203 dpi	300 dpi
Minimum label length	Tear-Off	0.7 in. (18 mm)	0.7 in. (18 mm)
	Peel-Off	0.5 in. (13 mm)	0.5 in. (13 mm)
	Cutter	1.5 in. (38 mm)	1.5 in. (38 mm)
	Rewind	0.25 in. (6 mm)	0.25 in. (6 mm)
Total media width	Minimum	0.79 in. (20 mm)	0.79 in. (20 mm)
(label + backing, if any)
	Maximum	4.5 in. (114 mm)	4.5 in. (114 mm)
Total thickness		0.003 in. (0.076 mm)	0.003 in. (0.076 mm)
(includes backing, if any)
		0.012 in. (0.305 mm)	0.012 in. (0.305 mm)
Cutter maximum full-width media thickness		0.009 in. (0.23 mm)	0.009 in. (0.23 mm)
Roll media core inside diameter		3 in. (76 mm)	3 in. (76 mm)
Maximum roll diameter on 3 in. (76 mm) core		8.0 in. (203 mm)	8.0 in. (203 mm)
Interlabel gap	Minimum	0.079 in. (2 mm)	0.079 in. (2 mm)
	Preferred	0.118 in. (3 mm)	0.118 in. (3 mm)
	Maximum	No more than the calibrated	No more than the calibrated
		length of the label.	length of the label.
Maximum internal fanfold media pack size		8.0×4.5×4.5 in.	8.0×4.5×4.5 in.
(label + backing): L × W×H		(203×114×114 mm)	(203×114×114 mm)
Ticket/tag sensing notch: L × W		0.12×0.25 in. (3×6 mm)	0.12×0.25 in. (3×6 mm)
Ticket/tag sensing hole diameter		0.125 in. (3 mm)	0.125 in. (3 mm)
Label registration tolerance (vertical)		± 0.06 in. (± 1.5 mm)	± 0.06 in. (± 1.5 mm)
Label registration tolerance (horizontal)		± 0.06 in. (± 1.5 mm)	± 0.06 in. (± 1.5 mm)
Maximum media density		0.5 ODU	0.5 ODU

P1056468-002 7/3/13