Electrolux ELECTRICS HEATED STEAM CONVECTION OVEN manual Setting the TIME, Date and Delay Start

USA

4.4.2 SETTING THE TIME, DATE AND DELAY START

- TIME and DATE -

Proceed as follows to set the TIME and DATE:

1)Switch on the oven by pressing button I.

2)Hold down button TM until you hear a beep and the HOUR digits start flashing.

TM

3)Turn the knob (while the hour digits are flashing) clockwise or counter clockwise to set the current hour.

4)Press button TM and set the MINUTES in the same way as for the hours (step 3).

day month year

E.g.: 24-01-2002

CURRENT DATE

E.g.: 9.15

CURRENT TIME hours minutes

E.g.: 9.25

DELAY START (10 minutes)

timer LED on

5)Press button TM again to set the DATE (shown on the TEMPERATURE DISPLAY) in the same way as the HOURS (previous step 3).

6)Press button TM to set the MONTH and YEAR repeating the procedure used to set the date.

- DELAY START- (delayed start of cooking cycle)

Once the TIME and DATE have been set (see previous heading) carry out these operations:

1)Press button P (program) and select the required recipe or program:

program

A

O

P

r

e

H e

a

t

S t

e a m

i

n

g

selected

P

:

M

E

N

U

2) Press button P and select P: ADD DELAY.

A

O

P

r

e

H e

a

t

S t

e a m

i

n

g

SELECTED ITEM

P

:

A

D

D

D E

L

A

Y

3) Press button P: a flashing letter D (Delay Start) will be displayed.

LETTER "D"	A	O		D 1
FLASHING	P	:	M	E N	U

4)Set the required START time (shown in small numbers on the TM timer display) and press the START/STOP button.

The cycle will start at the time set in the DELAY START option and the letter D will flash in alternation with a dot to remind the user that this function is active.

4.4.3 EDITING THE SET PARAMETERS

With the cooking cycle blocked, started or stored, use the relative commands to edit the following parameters:

1)cooking mode;

2)cooking temperature TS;

3)cooking time TM;

4)probe temperature PRB (in alternative to cooking time).

Note:

-When you edit the parameters of a STORED cooking program (during a cooking cycle) an asterisk "*" will appear alongside the program number.

-Editing the parameters of a STORED cooking program overwrites the original parameters with the new ones.

Proceed as follows if the oven is performing a cooking cycle composed of various phases and you wish to edit the parameters of the next phase to be executed:

a)Press the START/STOP button to stop the current cooking cycle.

b)Press the (>) button to display the phase you intend to edit, and enter the new values.

c)Press the START/STOP button to resume the current cooking cycle.

4.4.4 STORING RECIPES OR PROGRAMS

RECIPES or programs (cooking cycles) can be stored with a sequential number and a descriptive name to assist in retrieval.

E.g.: -01------	(RECIPE n°)
CHICKEN	(RECIPE description)
-02------
POTATOES

Once a RECIPE (composed of one or more cooking phases) has been set using the MANUAL or AUTOMATIC CONTROLS carry out these operations:

1) Press button P

phase 1 flashing					1
selected item
	P	:	ME	N	U

>

2)Press button P again to open the menu and select the MEMORIZE RECIPE option.

phase 1 flashing						1
selected item
	P	:	M	E	M	O	R	I	Z	E	R E C I P E

3)Press button P to start saving data, the SELECT NUMBER option is displayed.

A 2 1

displayed item P : S EL E C T NU M B ER

5958 931 01

24