Fast EtherHub 3500 System User’s Guide
Screen statistics are not automatically refreshed from the agent. Select Refresh Statistics to update the displayed values.
The values displayed have been accumulated since the last system reboot or counter reset.
Statistics for SmartExtender Module
Statistics for the SmartExtender Module includes the basic Ethernet variables shown below.
|
| SEM Port Statistics |
|
| |
|
| Return to Previous Panel |
|
| |
|
| Refresh Statistics |
|
| |
Hub ID : 1 |
|
|
| Position : 1 | |
Port ID : SEM |
|
|
|
|
|
In Frames | : | 4265954 | FCS Errors | : | 52 |
In Octets | : 842532471 | Frames Too Long | : | 0 | |
In Discarded | : | 744817 | Runts | : | 33 |
Out Frames | : | 24808 | Collisions | : | 11678 |
Out Octets | : | 4432038 |
|
|
|
Out Discarded | : | 1202 |
|
|
|
Return to previous panel.
Use arrow keys to move. <Enter> to confirm. <Ctrl+T> to return to Main Menu.
Figure 4-29 SEM Port Statistics Menu
Field
Hub ID
Position
Port ID
In Frames
In Octets
In Discarded
Out Frames
Out Octets
Out Discarded
FCS Errors
Frames Too Long
Runts
Collisions
Displayed items are briefly described in the following table.
Description
Hub identifier within the stack.
The physical position in the stack (as determined by its position from the top of the FlexBus chain).
Port identifier on the hub.
Number of frames received.
Number of octets received.
Number of frames received and filtered.
Number of frames transmitted.
Number of octets transmitted.
Number of frames transmitted and filtered (i.e., at the repeater to SEM interface).
Number of Frame Control Sequence errors.
Number of times frame length has exceeded the maximum allowable size (i.e., 1518 bytes)
Number of fragments (that were too long to qualify as short events).
Number of simultaneous node transmissions detected by this device.
Table 4.22 SEM Port Statistics Menu
Configuring the System |
