Fast EtherHub 3500 System User’s Guide
FlexBus 3500 Ports
The unit has two SCSI FlexBus connectors labeled In and Out for combining the hub with other compatible hubs to form a single repeater stack. The FlexBus 3500 stack cable that comes with this package is used specifically for these ports. Only hubs cascaded through the In and Out connection can be managed by a network management agent.
In
Using a FlexBus 3500 cable, connect this port to the “ Out” port of any Fast EtherHub 3500 series hub.
Out
Using a FlexBus 3500 cable, connect this port to the “ In” port of any Fast EtherHub 3500 series hub.
ΦThe unit also supports “hot remove” for the FlexBus cable. This allows you to unplug the FlexBus cable while the unit is powered on. However, note that
Hardware Reference |
