Accton Technology 12mi SNMP Safety Compliance, Underwriters Laboratories Compliance Statement

Fast EtherHub 3500 System User’s Guide

Safety Compliance

Underwriters Laboratories Compliance Statement

Operating Voltage

120 Volts

240 Volts (For North America)

240 Volts (For Europe only)

Important! Before making connections, make sure you have the correct Cord Set. Check it (read the label on the cable) against the following specification list.

Cord Set Specifications

UL Listed/CSA Certified Cord Set

Minimum 18 AWG

Type SVT or SJT three conductor cord

Maximum length of 15 feet

Parallel blade, grounding type attachment plug rated 15A, 125V

UL Listed/CSA Certified Cord Set

Minimum 18 AWG

Type SVT or SJT three conductor cord

Maximum length of 15 feet

Tandem blade, grounding type attachment plug rated 15A, 125V

Cord Set with H05VV-F cord having three conductors with minimum diameter of 0.75 mm2

IEC-320 receptacle

Male plug rated 6A, 250V

The unit automatically matches the connected input voltage. Therefore, no additional adjustments are necessary when connecting it to any input voltage within the range marked on the rear panel.

Do not plug a phone jack connector into any of the RJ-45 ports. This may damage the hub.

Les raccordeurs ne sont pas utilisé pour le système téléphonique!

D-4 Regulatory Standards