Fast EtherHub 3500 System User’s Guide
Hub Configuration
To configure a hub, select it from the list shown above. The following Hub Configuration menu will appear, allowing you to set parameters for the base repeater unit or the network management module.
| Hub Configuration |
| |
| Return to Previous Panel |
| |
Hub ID | : 1 | Position | : 1 |
Name | : H/W Group | Type | : |
Segment | : 1 | H/W Ver | : 0 |
Status | : ATTACHED | F/W Ver | : 1.05 |
Power 1 | : OPERATIONAL |
|
|
Power 2 | : NOT PRESENT |
|
|
Network Management Module (NMM) : |
| ||
Status | : PRIMARY | H/W Ver | : 4 |
Segment | : 1 | F/W Ver | : 1.09 |
Bootup Option : NORMAL
Physical Address :
Return to previous panel.
Use arrow keys to move. <Enter> to confirm. <Ctrl+T> to return to Main Menu.
Figure 4-12 Hub Configuration Menu
Configuring the System |
