Fast EtherHub 3500 System User’s Guide
Installing the System 2-3
Mounting Hubs in a Rack
If you need to install a
redundant power module,
refer to
Installing a Backup
Power Supply
on page 2-11,
and complete that procedure
before stacking the hub.
Please comply with the following instructions to ensure that
your hub is securely mounted in the rack.
1. Use an standard EIA 19-inch rack.
2. Use a Phillips (i.e., cross-head) screwdriver to attach the
brackets to the sides of the hub.
3. Position the hub in the rack by lining up the holes in the
brackets with the appropriate holes on the rack, and then use
the supplied screws to mount the hub in the rack.
Figure 2-2 Mounting Hubs Using a Mounting Rack