Fast EtherHub 3500 System User’s Guide
Configuring Repeater Ports
If you select the repeater port type (i.e., 1 through 12), the Port Configuration Menu will open. This menu displays the ID and stack position of the selected hub, and also allows you to enable/disable any repeater port in the selected hub.
|
|
| Port Configuration |
|
| |
|
|
| Return to Previous Panel |
|
| |
Hub ID : 1 |
|
|
|
| Position : 1 | |
Port ID | Name | Type | Admin Status | Oper Status | Link State | Partition |
1. |
| DOWN | NOT PART | |||
2. |
| NOT PART | ||||
3. |
| DOWN | NOT PART | |||
4. |
| DOWN | NOT PART | |||
5. |
| DOWN | NOT PART | |||
6. |
| DOWN | NOT PART | |||
7. |
| DOWN | NOT PART | |||
8. |
| DOWN | NOT PART | |||
9. |
| DOWN | NOT PART | |||
10. | Steve | UP | NOT PART | |||
11. |
| DOWN | NOT PART | |||
12. |
|
| ENABLED | ENABLED | DOWN | NOT PART |
Return to previous panel.
Use arrow keys to move. <Enter> to confirm. <Ctrl+T> to return to Main Menu.
Figure 4-15 Port Configuration Menu
Menu items are briefly described in the following table.
Field
Hub ID
Position
Port ID
Name
Type
Admin Status1
Oper Status1
Link State
Partition
Description
Hub identifier within the stack.
The physical position in the stack (as determined by its position from the top of the FlexBus chain).
Numeric identifier 1~12 or SEM (i.e., SmartExtender Module).
Connection type for the repeater Ports 1~12 is
Any port may be set by the operator to ENABLED or DISABLED.
Reflects the port’s actual status as ENABLED or DISABLED.
Indicates if the port has a valid connection to an external device.
Indicates if the port is partitioned. (Refer to Partition/Disable Indicators in Chapter 5 for a more detailed description of the reasons a port may be partitioned.)
1 - If the port is set to ENABLED by the administrator, but used as a backup port, Admin Status and Oper Status will differ.
Table 4.11 Port Configuration Menu
Configuring the System |
