Command Reference Guide CA Profile Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 1028

CA PROFILE CONFIGURATION COMMAND SET

To activate the Certificate Authority (CA) Profile Configuration mode, enter the crypto ca profile
command at the Global Configuration mode prompt. For example:
>enable
#
configure terminal
(config)#
crypto ca profile MyProfile
Configuring New CA Profile MyProfile
(ca-profile)#
The following comm a nd s are com mo n to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port>
on page 28
do on page 32
end on page 33
exit on page 34
All other commands for this command set are described in this section in alphabetical order.
crl optional on page 1029
email address <email address> on page 1030
enrollment retry [count | period] on page 1031
enrollment terminal on page 1032
enrollment url <url> on page 1033
fqdn <fqdn> on page 1034
ip-address <address> on page 1035
password <password> on page 1036
serial-number on page 1037
subject-name <name> on page 1038