ADTRAN 5000 Series debug ip pim-sparse assert [event | state] <address>

Command Reference Guide Enable Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 117
debug ip pim-sparse assert [event | state] <address>
Use the debug ip pim-sparse assert command to display debug messages associated with
protocol-independent multicast (PIM) sparse assert transactions. Debug messages are displayed (real time)
to the terminal (or Telnet) screen. Use the no form of this command to disable debug messages.
Syntax Description
event Displays PIM sparse assert events.
state Displays PIM sparse assert state changes.
<address> Specifies group address to filter.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 2000, 5000, and Total Access 900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example activates all PIM sparse assert event messages:
>enable
#debug ip pim-sparse assert event