ADTRAN 5000 Series logging email exception-report address-list <email address>; <email address>

Command Reference Guide Global Configuration Mode Command Set

logging email exception-report address-list <email address>; <email

Use the logging email exception-report address-list command to specify one or more email addresses to

receive an exception report for use in troubleshooting. Use the no form of this command to remove a listed

address.

Syntax Description

<email address> Specifies the complete email address to use when sending exception reports.

(This field allows up to 256 characters.) Enter as many ema il addresses as

desired, placin g a semi- c o lon (;) betw ee n ad d re sses.

Default Values

By default, there are no config ured logging email addresses.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 9 00 Series units.

Command History

Release 11.1 Command was introduced.

Functional Notes

When AOS experiences an exception it will generate a file with detailed information that ADTRAN’s

Technical Support can use to diagnose the problem, This command allows the unit to email the exception

report to a list of addresses upon rebooting after the exception. This command should be used in

conjunction with the other logging email command s. Refer to logging email ad dress-list <email address> ;

<email address> on page 418, logging email on on page 420, logging email priority-level [error | fatal |

info | notice | warning] on page 421, logging email receiver-ip <ip address> on page 422, logging email

sender on page 4 23, and logging email source-interface <interface> on page 424 for more information.

Usage Examples

The following example will enable exception report forwarding to john.doe@company.com using the

1.1.1.1 SMT P em a il serv er :

(config)#logging email on

(config)#lo g gi n g ema il rece ive r-i p 1. 1.1.1

(config)#logging email exception-report address-list john.doe@company.com